Перейти к информации о продукте
1 из 7

BEAM 480 IP (All aluminum)

BEAM 480 IP (All aluminum)

  • Product Precautions
  • This lamp is for professional use only.
  • Before operation, ensure that the power supply voltage is consistent with equipment requirements.
  • Do not place the product in places where it is easy to loose or shake.
  • In the process of use, if the lamp is abnormal, stop using the lamp in time.

  • To ensure the service life of the product, do not put the product in the damp or leaking place, and do not work in the environment where the temperature is above 60 degrees.
  • When the bulb is used, the voltage change of the power supply should not exceed ±10%. If the voltage is too high, the life of the bulb will be shortened. If the voltage is too low, the light color of the bulb will be affected.
  • After power off, it is necessary to use the lamp to cool down fully after 20 minutes before power on again.
  • Rotating parts of lamps and lanterns and sticking accessories must be checked regularly, loose, shaking timely reinforcement, in case of accidents.
  • To ensure the normal use of this product, please read this instruction carefully.

 

  • Product introduction
  • Light source power: 480W;
  • Voltage: AC 200V~240V/50~60Hz;
  • Color plate: each color plate is composed of 14 color plates + white light;
  • Pattern plate: 18 pattern effects;
  • 540 degrees translation, 270 degrees tilt.
  • Overheating protection;
  • Control mode: DMX512/ master slave/automatic;
  • IP65 protection level

Send an inquiry

Просмотреть всю информацию